Masonry Works in Dubai
While it is possible to replace individual tiles without removing the surrounding wall or floor installation, it can be a delicate process. If you want to replace your Tiles or any other convenience work no one will stop you to contact us at fixitserviceuae.com.
Here are some steps to follow:
- Gather your materials
You will need a hammer, a cold chisel, an old chisel or putty knife, a latex tile adhesive, a trowel, and the new tiles.
- Remove the grout
Use a grout saw or rotary tool to remove the grout around the tile you want to replace.
- Crack the tile
Use a hammer and cold chisel to crack the tile into smaller pieces. Be careful not to damage the surrounding tiles.
- Remove the tile pieces
Use an old chisel or putty knife to remove the broken tile pieces and any adhesive still attached to the substrate.
- Clean the substrate
Make sure the substrate is clean and free of debris before installing the new tile.
- Apply the adhesive
Use a trowel to apply the latex tile adhesive to the back of the new tile. Spread the glue evenly, and do so.
Install the new tile
Press the new tile firmly into place, making sure it is level with the surrounding tiles.
- Let the adhesive dry
Allow the adhesive to dry according to the manufacturer’s instructions before grouting the tile.
- Grout the tile
Use a grout float to fill the gap between the new tile and the surrounding tiles with grout. With a wet sponge, remove any extra grout.
- Let the grout dry
Allow the grout to dry according to the manufacturer’s instructions before using the area.
Please share a few details so we can assist you with your request
Block wall plaster
When plastering a block wall, it is important to prepare the surface by cleaning it thoroughly and making sure it is free of any debris, dust or loose material. Once the surface is ready, follow these steps to apply plaster:
Mix the plaster according to the manufacturer’s instructions. You can use a mixing drill or a paddle to achieve a smooth and consistent mix.
Use a spray bottle or a hose to wet the block wall before applying the plaster. This will help the plaster adhere to the wall and prevent it from drying out too quickly.
Use a flat-edged trowel or hawk to spread the plaster onto the wall, working in small areas. Hold the trowel at a slight angle and use a smooth, sweeping motion to apply the plaster evenly.
Scatter plaster on the wall by scooping it onto a second trowel and scraping it onto the center of the first trowel. This will help you control the amount of plaster you are applying and ensure an even coverage.
Use the flat-edged trowel to smooth and level the plaster, working from the bottom up. Keep the trowel at a slight angle and use a light pressure to avoid creating air pockets or ridges.
Continue to apply plaster to the wall, working in small sections at a time. Be sure to re-wet the wall if it starts to dry out, as this can affect the quality of the finish.
Once you have finished applying the plaster, use a finishing trowel to smooth and level the surface. This will give you a clean and professional-looking finish.
Before painting or decorating the wall, let the plaster completely dry. By following these steps, you can achieve a smooth and durable finish when plastering a block wall.
Concrete leveling is an effective method for repairing uneven or sunken concrete surfaces. The process involves drilling small holes in the affected area and then injecting a specialized mixture of materials under the slab to lift it back into place. This method can be used for a variety of concrete surfaces, including driveways, sidewalks, and even basement floors.
Concrete leveling is a popular alternative to traditional concrete replacement because it is much more affordable and less disruptive. It also has a lower environmental impact since it reduces the amount of waste generated during the repair process. Additionally, the repaired area can be used within a few hours after the repair is completed, compared to days or weeks with traditional concrete replacement.
Overall, concrete leveling has been proven to be a reliable and effective method for repairing concrete surfaces, and it is a great option to consider if you are looking to get your concrete’s safety and appearance back to normal.
Any kind of internal demolition of walls
In addition to the physical damage and mess, internal demolition of walls can also impact the structural integrity of the building. It’s important to ensure that you have a clear understanding of the building’s design and load-bearing walls before starting any demolition work.
If you’re planning to undertake internal demolition work, it’s important to take precautions to protect yourself and others. This includes wearing appropriate personal protective equipment (PPE), such as goggles, gloves, and a dust mask, and ensuring that the area is well-ventilated to prevent the buildup of hazardous dust.
It’s also important to consider the disposal of waste materials. Demolition waste can be hazardous, and should be disposed of in accordance with local regulations. This may involve hiring a skip or arranging for a waste removal service to collect and dispose of the waste.
Before undertaking any internal demolition work, it’s recommended that you consult with a qualified contractor or structural engineer to assess the impact of the demolition on the building’s structural integrity, and to ensure that appropriate measures are taken to mitigate any risks.
Get in Touch:
With many years of experience, fixitserviceuae.com proposition is to serve its clients with the goal of maximizing the value of their construction investment. We work as one team to identify and deliver exceptional value in a way that results in high-quality, safe, more efficient, and competitive construction outcomes. Our technical professional team always performs professionally with all of their clients.
For your convenience, you can also reach us at +97142358432. Always contact and visit fixitserviceuae.com for the best buying options, no matter where you are. We can be in contact and always respond 24/7 a day.