If you’re planning to install wallpaper from us, there are a few things you’ll need to keep in mind to ensure a successful and stress-free installation:

Materials for Use Wallpaper Fixing (Installation):

• Caulking 3/4″
• plywood
• drywall compound
• wallpaper primer
• wallpaper sponge 
• sandpaper 
• And sawhorses are among the equipment and supplies.

Pliers for drop cloth

Broad knife, a utility knife with breakaway blades, and a measuring tape

Long-nap paint roller, soft seam roller, and wallpaper tray

1. Prime the walls.

Fill in any holes in your walls, then sand them flat to finish preparing them. Prime the walls with acrylic primer (or wallpaper sizing) and wait for it to dry.

2. Scale the wall covering

Add six additional inches to the wall’s height to allow for trimming. Use a utility knife to trim a few pieces of the wall covering after rolling it out on your work surface.

3. Draw a line to hang the first piece and mark it.

Label a plumb Unbook the wall covering, mark a plumb line on the wall, and then start installing it. With the heels of your hands, slide the wall covering onto the wall until the edge aligns with the plumb line.

If you do not intend to add crown molding, apply the wall covering so that it extends an additional three inches past the top edge of the wall. We will add crown molding later.

4. Make the Surface Smooth and Continue

If you have embossed paper, use a soft-bristle wallpaper brush to smooth it out. If you have standard wallpaper, use a straightedge.

Unbook the bottom piece and continue with the wallpaper once the top of the paper has been smooth brush. Apply the same method to hang each additional piece.

5. Trim the Corners

Use a straightedge and utility knife to trim any extra paper at the corner before applying the wall covering there. If the number of pieces you removed exceeds 2, “wide, start the following wall with it. Draw a second plumb line 1/4 from the corner “Hang the strip at a distance that is less than its width. Press the edge into the corner, and use the straightedge and utility knife to trim the paper.

6. Close Any Gaps using caulk

After 20 minutes, fill in any gaps in the corners with caulk. Remove excess caulk with a damp cloth or sponge.

7. Cut off and seal the Wallpaper

Make sure the power is off before hanging the wall covering directly over switches and outlets. Cut an X over the outlets and switches after 20 minutes, then remove just enough material to reveal them.

Seal the wall covering with satin or semi-gloss paint if it is embossed paper. For all the textured areas, apply paint with a roller that has a long nap. The paint will cover the seams and make the wall look smooth.

What different types of wall paper are there?

• Photo of Installation of any kind of wallpaper
• Various wallpaper liners available. This kind of wallpaper, also known as lining paper, is made of paper or fiberglass.
• Wallpaper with a print. This kind comes in a huge selection of colors and patterns and is widely used.
• Wallcoverings in vinyl, foil, and flock
• Decorative Mylar
• Background in bamboo

Remember, installing wallpaper can be a time-consuming and challenging task, so be patient and take your time to ensure a professional-looking finish. Alternatively, you can hire us at fixitserviceuae.com as a professional wallpaper installer if you prefer.

Get in Touch:

With many years of experience, fixitserviceuae.com is to serve its clients with the goal of maximizing the value of their construction investment. We work as one team to identify and deliver exceptional value in a way that results in high-quality, safe, more efficient, and competitive construction outcomes. Our technical professional team always performs professionally with all of their clients.

For your convenience, you can also reach us at +97142358432. Always contact and visit fixitserviceuae.com for the best buying options, no matter where you are. We can be in contact and always respond 24/7 a day.